
Road sign for the yard: how to order signs on the track
A road sign for the construction site announces the changes on the road from time to time: shortening, speed limits, diversions or temporary traffic. If the signs appear in the correct order, the drivers reduce the speed, and the team works more securely. Below you find a practical map of signs U and V.
In short: first you warn, then limit speed, guide the provisional route and finally announce the end of the restrictions, after the approved scheme.
Do you need help choosing?
Tell us what you need and we'll send you the offer on the same working day.
A road sign for the yard does its job only as part of a coherent system: warnings, restrictions, directional barriers and the final sign. Reflective folly, the size and stability of the support matter especially at night. However, the exact scheme shall be laid down by the signalling project approved by the road manager and the police. Find signs U and V in category road signs works.
Any work on the road changes, temporarily, the way drivers circulate. A road sign for the yard transmits this change before the vehicle reaches the team. Therefore, it matters not only what signs you use, but also their order on the path. In the front guide we follow exactly this sequence, with examples from the Protrafic.ro range.
Why Order Matters for Each Temporary Road Sign
The driver needs time to read, understand and react. If he sees a direct 20 km/h limit, he'll suddenly brake. Instead, a logical succession gradually prepares it. So, the typical scheme follows four simple steps:
- The warning, which says what's next.
- Restriction, i.e. speed or prohibition of overrun.
- The guide on the provisional route.
- The end, by which you announce the return to normal.
Each road sign for the yard has its place in this succession. However, the distances and the number of signs shall be fixed to them by the approved signalling project for the work, not just the experience of the team.
Step 1: Warning signs
First, the signs from the beginning announce the nature of the danger. For example, temporary indicator U4 indicate a dangerous approach, i.e. level differences near the roadway. Then, sign U2 for narrow road on the right, with 900 mm side, shows that the band is shrinking. In a surface treatment sector, the sign U7 announces the risk of rock spray.
In addition, if traffic alternates by traffic light, a U9-type road sign announces temporary traffic light. Thus, red light in the work sector no longer comes as a surprise.
Step 2: Speed and overrun restrictions
Later, after warning the restrictions come. For example, the sign U13 introduces a temporary limit and category includes variants for 20 km/h and 50 km/h. The model for 50 km/h has a diameter of 800 mm and class 2 sheets, as described in the product name. At the same time, the U12 sign prohibits overtaking cars, except for motorcycles without attachments.
In other words, here every road sign for the yard requires a clear rule. Therefore, the limits must make sense to the driver. Many drivers ignore a very small limit on a long sector, for no visible reason. That's why some schemes lower the speed in steps, for example from 50 to 20 km/h close to the team.
Step 3: guidance with temporary road sign
When the band moves, the driver needs, especially at night, clear landmarks. Indicator U16, in the form of an arrow, show the path of temporary deviation. The sign U23 marks a temporary deviation, so a movement of traffic on a provisional route. In addition, reflecting foil barriers visually close the working area:
- Model V10 normal barrier has 2000 x 250 mm and reflecting sheets class 1.
- The V11 directional barrier version measures 330 x 2000 mm and shows the direction of bypass.
However, a road sign for the yard does not take place physical delimitation. For this add steering cones or elements of the range of barriers and fences.
Step 4: Final Sign
However, many forget the last sign, although it matters as much. The sign U14 announces the end of all temporary restrictions. Without it, the driver doesn't know, for example, whether the speed limit matters anymore. Therefore, a U14-type road sign correctly closes the scheme and renders the flow of traffic.
Signalling at night
At night, a road sign for the yard depends almost entirely on the reflective sheet. That's why many builders add intermittent lamps to the barriers and the first signs of the scheme. In addition, the leaf class, referred to in the product name, shows the type of reflective material of the sign. However, the choice of class makes the project, after speed and type of road. Thus, you avoid the situation where the sign looks good day, but disappears at night in the light of the lights.
At the same time, check every road sign for the yard and after leaving the dark, not just in the morning. In other words, he runs the car schedule, like a regular driver, and sees what signs are hard to see.
How to choose a road sign for the yard: size, foil, support
Besides the symbol, you check three practical details. First, the dimension: the signs of category of indicators for work For example, the width of 900 mm or the diameter of 800 mm. Then, the class of the reflective sheet, which you find in the name of each product. In the end, the support: a good sign on an unstable pillar falls to the first wind gust.
Also think about the speed of the road. On a fast road, the driver must see the sign from beyond a neighborhood street. Therefore, at a road sign for the yard the size and the sheet are chosen after the project, not after you have through the warehouse.
Frequent errors with a temporary road sign
- Signs left on the spot after the end of the work, which misleads the local drivers in particular.
- Indicators turned or fallen, especially after a night of wind.
- Speed limit without U14 at the end.
- Dirty leaf, which reflects the light of the lights.
For rules and information about road traffic, you can also follow the website Romanian Police. In addition, a daily check of each road sign for the yard prevents most of these problems.
Frequently Asked Questions about Road Signs for Shipyard
What difference is there between a road sign for the yard and a permanent one?
Temporary signs in the U series usually have yellow background and remain on the road only as long as the work lasts. Then you take them out, so as not to contradict the permanent signal.
Can I only use the U13 sign, without warning before?
We don't recommend it. The driver reacts better when he first receives the warning and then hardly restrictions.
Who determines how many signs they put?
For each road sign for the construction site, the number, order and distances shall be determined by the signalling project approved by the road manager and the road police.
What road sign for the construction site announces the end of the work?
The sign U14, ‘The end of all restrictions,' announces the return to normal conditions of circulation.
Do you have a job in preparation? See the full range of Road signs for works and compare the size and class of the sheet. The Protrafic.ro team helps you choose each road sign for the yard after your work schedule.



















