Technical advice: 0725 404 404 · Fast delivery nationwide · Blog

Protrafic.ro
Offers
0725 404 404 Contact

For companies and public institutions: purchasing via SEAP / SICAP details

Product categories
OffersSee discounts ›
Intermittent lamp for works: colours, energy and mounting

Road works and markings

Intermittent lamp for works: colours, energy and mounting

An intermittent lamp for works makes visible the site area from a distance, especially at night and in bad weather. Find out what yellow and red light means, how you choose between battery and solar panel and where you mount the lamp correctly, on cones, beacons or fences.

In short: yellow on the path, red at the obstacle, battery for safe and solar autonomy for long projects with reduced maintenance.

Do you need help choosing?

Tell us what you need and we'll send you the offer on the same working day.

An intermittent light for well-chosen works earns seconds of reaction for drivers and quiet for the field team. Choose the color after the role of the marked point, the energy source after the duration of the project and check the lenses and batteries daily. Along with cones, beacons and fences, the lamps clearly outline the route. Always keep a few spare lamps, so that a defective point does not leave blank in the signal. See models available in category Flashing lights.

An intermittent lamp for works turns a con or a fence into a visible point from a distance. Especially at night, on rain or fog, pulsed light warns the driver that the road is changing. We still see the differences between colors, energy sources and mounting modes.

Why does an intermittent lamp matter for works?

The reflector elements only respond to the light of the headlamps. Instead, the lamp emits its own light and attracts the look even from the side angles. Thus, the driver begins to slow down earlier. Especially on roads without public lighting, the difference becomes evident. Also, the work team earns a few precious seconds of safety. A flashing lamp for works therefore completes the basic signal without replacing it.

Yellow or red: which transmits each color

The flashing yellow light signals a danger that requires attention and speed reduction. Therefore, an intermittent lamp for works with yellow light sits on cones, beacons and fences along the area. The red light sends a firmer message, close to stopping or a direct obstacle. For example, Round solar lamp for works with flashing red light Mark the end of a tape closure. However, the colors follow the scheme of the signaling project, not the preference of the team.

Power sources for flashing lights

Category Flashing lights includes two families: with battery and solar charge. Every flashing lamp for works in the range has its advantages on the ground.

Battery lamps

Model Road light lamp with yellow light It works with battery. For replacement, the offer includes 6 V and 7 Ah 4R25 battery, a common format for road signs. The advantage is independence from sunlight. Instead, you have to track consumption and have backup batteries on the yard. On short projects, an intermittent battery lamp remains the simplest choice.

Solar charging lamps

The solar variants load the day and function from the accumulated energy. For example, Solar lamp for yellow works combines the solar panel with LEDs. So, too Solar signalling lamp use intermittent yellow light. Thus, an intermittent lamp for solar works reduces maintenance work on long projects. However, in the winter or in shaded areas, check whether the lamp retains the necessary autonomy.

How to mount an intermittent lamp for works

The lamps are usually caught at the top of the cones, on the beacons or on the protective fence panels. First, check your gripping system. Then, turn the lens towards the approaching traffic. In addition, keep regular distances between lamps, so that the driver reads the route as a continuous line. Finally, test all the lamps before dark. Thus, each intermittent lamp for works correctly signals from the first minute of darkness.

  • Category steering cones Cons drive traffic Mark the tape quickly closed.
  • Tags in the range of directional markers shows the direction change of the route.
  • Barriers and protective fences shall contaminate the working area.
  • The temporarily shut down tools next to the roadway also need a bright spot.

An intermittent lamp for work mounted on these supports creates a continuous, easy-to-follow contour.

Planning the number of lamps

The number of lamps depends on the length of the area and the speed of traffic. First, measure the route from the beginning of the closure to the end of it. Then, set the positions on the basis of the signalling project. For example, a gang closure on a fast road requires a denser contour than a work on a quiet street. In addition, keep a few spare lamps for quick replacements. At the same time, it keeps new batteries or solar lamps charged in self-utilitarian. Thus, an intermittent lamp for defective works does not leave a gap in the path.

Errors that reduce efficiency

  • Battery lamps unloaded, only observed at night.
  • The muddy lenses after a few days of work.
  • Unregular distances, which fragment the route.
  • Mixing colors without logic on the same path.
  • Solar lamps mounted in permanent shade.

An intermittent lamp for clean and charged works is worth more than three neglected lamps. That's why it includes their checking in the team's daily routine. For rules on the safety of workers on the site, consult and Labour Inspectorate website. The final signalling solution shall be established after the project and after the requirements of the road manager.

Flashing light for quick interventions

Intervention teams need equipment ready to use. Therefore, keep in self-utilising a few charged lamps, along with cones. flashing light with flashing red light helps to mark an unexpected obstacle. The red light also clearly shows where the intervention vehicle is stopped. In addition, the small lamps are easily tightened at the end of the intervention. Thus, an intermittent lamp for works becomes the first signal for those approaching.

Frequently Asked Questions about flashing lights

How long does an intermittent battery lamp last?

The autonomy depends on the model, the battery and the mode of operation. Therefore, check the lamp on long projects daily.

Am I going to sun lamps in the winter?

Yeah, but the short days reduce the load. So, choose positions without shadow and check the evening operation.

What color do I choose on a yard fence?

Usually the yellow marks the route, and the red marks the end or obstacle. However, the signaling project has the last word.

Can I use an intermittent lamp for works and parking?

Yes, especially the temporary delimitation of a risk zone. However, choose the yellow light for warning and check the stability of the support.

Compare battery and solar models in category Flashing lights. Protrafic.ro helps you choose an intermittent lamp for works suitable for cones, beacons or fences. Thus, the working area remains visible at any time.

Recommended products

Recent articles

All articles

Cookie settings

Choose which categories you accept. Strictly necessary cookies are always active; the others start only with your consent and you can change them at any time. Cookie policy

They make the site work: shopping cart, favourites, customer account sign-in, form security and remembering your cookie choice. They cannot be disabled.

What we store (5)
  • erp-consent · This site · Stores your cookie choice. Duration: 365 days.
  • erpShop.cart · This site · Products in your shopping cart. Duration: until the cart is emptied.
  • erpShop.fav · This site · Products you saved to favourites. Duration: until you delete them.
  • __Host-*_sess · This site · Keeps you signed in to your customer account. Duration: session (12 hours) or 30 days with “Remember me”.
  • __Host-*_csrf · This site · Security: protects account forms against forged requests. Duration: session.

Remembers recently viewed products so you can find them easily. The data stays only in your browser.

What we store (1)
  • erpShop.seen · This site · Recently viewed products. Duration: until you delete them.

Shows us which pages are visited and how the site is used, so we can improve it (Google Analytics).

What we store (2)
  • _ga · Google Ireland Ltd. (Google Analytics) (third party) · Distinguishes visitors for visit statistics. Duration: 2 years.
  • _ga_4009D1RE45 · Google Ireland Ltd. (Google Analytics) (third party) · Keeps the state of the visit session. Duration: 2 years.

Video clips played directly on YouTube (Google). When playing, YouTube can store data in the browser.

What we store (1)
  • YSC, VISITOR_INFO1_LIVE, yt-remote-* · Google Ireland Ltd. (YouTube) (third party) · Video playback and YouTube statistics; only after you start a video. Duration: session – 6 months.
Third-party providers (2)