
Speed rubber bunp: how to choose the right size
A rubber speed bump slows down cars in parking lots, private alleys and industrial courtyards, with reduced noise on the pass. However, models differ in width, height and strength. We'll show you how to choose the right size for your traffic and how to mount it right.
In short: 30–45 mm for light traffic, 50 mm for firm effect, 900 x 500 x 50 mm model for trucks, and reflective strips help at night.
Do you need help choosing?
Tell us what you need and we'll send you the offer on the same working day.
The correct choice starts from vehicles travelling daily on the road. For cars, 40–45 mm modules arrive, and for trucks and machinery, it is worth a model for heavy traffic. Reflective bands and retro-reflectors increase visibility at night, and the yellow-black alternation makes the threshold easy to recognize. Mount the modules across the width of the band, so drivers don't bypass the threshold. View all dimensions in category Rubber limiters.
A rubber speed bump forces drivers to slow down without asking for special attention. You see it often in parking lots, industrial courts and residential alleys. However, models differ greatly in size and height. Therefore, the wrong choice leads either to a weak effect or to too harsh passage. Below we compare the real models of Protrafic.ro and explain how you fit traffic.
What does a rubber speed boom do
The principle remains simple. The wheel climbs on a short elevation, and the driver feels the passage into the passenger compartment. So, next time, reduce the speed before the threshold. The rubber also has the advantage of elasticity. In other words, it absorbs a part of the shock and reduces the noise to the pass. That's why a rubber speed bump fits well near homes or underground parking, where the echo amplifies any sound.
Dimensions matter: width, depth, height
Each mode has three odds. The width indicates how far it covers the roadway, and the depth shows the length of the threshold in the direction of walk. The height, instead, gives the intensity of the effect. For example, every rubber speed bump in our offer has other odds:
- Module 500 x 400 x 40 mm, with profile down, for easy traffic.
- Version 500 x 400 x 50 mm with retro-reflector, in yellow, visible and evening.
- The 500 x 300 x 45 mm, yellow or black, for narrow alleys.
- Model of 470 x 600 x 30 mm with six reflective strips, with a very low profile.
- Limiter 900 x 500 x 50 mm for heavy traffic, designed for trucks and machines.
So the height of 30 mm offers a gentle passage, and the 50 mm slows down more firmly. At the same time, the depth makes the passage smoother for long vehicles.
Speed rubber bunp for each type of traffic
The first criterion remains the vehicle type. In a block parking lot, almost just cars. Instead, a logistics court receives daily self-utilization, trucks and stackers. Therefore, a model for easy traffic does not withstand as well under heavy loads.
Residential and private parking spaces
This is where the comfort of the tenants and the noise is reduced. A profile of 40–45 mm usually arrives. For example, the black bottom 500 x 300 x 45 mm integrates discreetly alongside the asphalt. The yellow version, instead, attracts a lighter look. Therefore, choose a black rubber speed bump where the appearance matters.
Commercial parks and gas stations
Traffic becomes more intense and varied. Therefore, choose modules with reflective strips, such as 500 x 900 x 50 mm road limiter, which has five anti-slip reflective strips. So the drivers observe him at night.
Industrial and logistical platforms
For trucks and machinery, choose a rubber speed bump for heavy traffic. The 900 x 500 x 50 mm model responds exactly to this need. In addition, the depth of the vehicle helps to ensure a more stable passage of loaded vehicles.
Yellow or black: colour of a rubber threshold
The color doesn't change the mechanical effect. However, it greatly influences the visibility. A yellow rubber speed bump can be seen from a distance, especially on closed asphalt. The black, on the other hand, looks more discreet and fits in spaces where the appearance matters. Many installations combine yellow and black modules alternately. Thus, the threshold ends a model of easily recognized stripes.
Reflective catadioptres and bands add visibility at night. For example, the black retro-reflector model, 500 x 400 x 50 mm, retains the sober appearance, but is seen in the light of the headlamps. In other words, a black rubber speed bump must not remain invisible at night.
How to mount a rubber speed threshold
Modules are usually fixed with anchors in asphalt or concrete. First, clean and dry the surface. Then mark the line of the threshold perpendicular to the direction of walk. Later, set the modules, give the holes and tighten the anchors. Finally, check that all the pieces are aligned and do not move to the pass.
- Leave a space for the water to drain at the edge of the tank.
- Signal from time to time any rubber speed bump, with indicator or marking.
- Avoid assembly even in the curve or immediately after an intersection.
- Regularly check the anchors, especially after winter.
Where you need approvals
On your property, the decision is yours, but it takes into account pedestrians and intervention vehicles. On public roads, however, the situation differs. There, the assembly of any rubber speed bump shall be established after the project and with the agreement of the road manager and the authorities. Legal framework finds it on the portal legislatie.just.ro. Therefore, it does not set thresholds on a public road without the necessary approvals.
Alternatives to a rubber limiter
Sometimes rubber is not the only option. For small and light modules, see Plastic Limiters. For overlifted pedestrian passes, spherical caps or cable bridges, consult special limiters. At the same time, all elastic models find them in the category Rubber limiters.
Frequently asked questions about a rubber threshold
What height do I choose for a block parking lot?
Usually, a 40–45 mm rubber speed pump provides a good balance between effect and comfort.
Can I mount the modules on the floor?
You can, but fixing on the floor requires attention. Pavels can move, so check the stability of the base before mounting.
How long does the threshold have to go?
The plague covers, ideally, the whole width of the band. Otherwise, the drivers are going around the edge. Therefore, calculate the number of modules after the width of the road.
What model do I choose for trucks?
Choose a rubber speed bump for heavy traffic, such as the 900 x 500 x 50 mm model.
Did you measure the road and know which vehicles are running on it? Then compare the models in the category Rubber limiters and choose a rubber speed pump suitable for your area. Protrafic.ro helps you calculate the number of modules and choose the right option.



















