
Speed bump for parking: special solutions and uses
A speed bump for parking can take many forms: spherical cap, overlifted pedestrian passage, one-way device or cable-pass ramp. Everyone solves another parking problem. See when and where you use each special solution.
In short: colour caps, overlifted passage at crossings, ramps for cables and edges, and the spiked device only after risk analysis.
Do you need help choosing?
Tell us what you need and we'll send you the offer on the same working day.
A secure parking lot combines several devices, each with its own role. The classic meadows slow down the entrance, the cap controls the colors, and the overlifted passage protects the pedestrians. The ramps and bridges for cables keep order at temporary events and works. The devices with spikes require risk analysis and clear signaling. Periodically check the fixtures and reflective sheets. See all solutions in category special limiters.
A speed bump for parking doesn't just mean a classic rubber threshold. In many parking lots, special situations occur: a pedestrian crossing, a one-way entrance, a footbridge or a high edge. Therefore, you need devices designed for each case. Each device also requires another type of assembly and other maintenance. You find them all in the category special limiters, and below you see where you use them.
Spherical calota, the smallest speed bunp for parking
The spherical calota has a dom shape and is mounted on time. Unlike a continuous threshold, you use it in rows or in the alternating model. Thus, slow down the cars without occupying the full width of the road. For example, the spherical cap type device matches the color between the parking spaces. In addition, you can use it to mark a stop line.
Passing over-heeled pedestrians
Especially in a big parking lot, pedestrians often cross colors. As speed bump for parking, the overlifted passage raises the crossing area to 7 cm. Therefore, drivers reduce the speed exactly where people go. Model Overlifted pedestrian passage uses recycled PVC modules, with non-slip reflective sheets. The modules shall be fixed in asphalt with dilutes and screws.
In other words, this speed pump for parking protects in particular the areas between entry into the store and parking places. You also meet him near schools and kindergartens, on private access roads.
Speed bump for single-way parking
For example, some parking lots have separate entrance and exit. However, the rush drivers sometimes try to get out at the entrance. Single direction speed limiter, with metal rods, allows the passage in one direction. Conversely, the stalks prevent the passage. Therefore, this device brings a real risk to tires and even people. We recommend that you use it only after the project and risk analysis, with the agreement of the authorities and with clear signaling at both ends.
Cable protection: ramps and parking threshold
Especially at events, temporary works or mobile equipment, cables appear on foot. Left unprotected, they deteriorate and cause impediments. In this case, you use bridges or ramps for cables. Thus, a speed pump for parking can also have a role in protecting the infrastructure.
- Bridges for 2, 3 or 5 cables, designed for pedestrian traffic;
- Ramp protection for 3 cables, for pedestrians and vehicles;
- The option for cable cross-section with a height of 100 mm;
- The edge edge edge with a cable cross-section, 150 mm high.
However, the difference should be noted: the cable bridges in this range cover pedestrian traffic. For vehicles, choose the ramps designed for car traffic.
Edge ramps
The high edges make it difficult to access the parking lot for low-cost cars, carriages or pallet trucks. For example, the threshold for 150 mm edges It eases the climb and also leaves a cable channel. The 100 mm version fits lower edges, and both complete a speed pump for parking.
How to limit combinations for parking
So, a well-organized parking lot uses several types of devices. First, slow down the cars to the entrance with a classic threshold. Then protect pedestrian crossings with an overlifted passage. Then, put the caps on the long colors, where the drivers tend to accelerate. Finally, signal any speed boom for parking with visible indicators and markings.
- Entry: rubber or plastic threshold;
- Colours: spherical calotes in line;
- Crossings: crossing of raised pedestrians;
- Single-sense output: device with spikes, only after risk analysis.
For classic thresholds, see categories Rubber limiters and Plastic Limiters. In other words, each speed bump for parking gets the right place in the scheme.
Safety of pedestrians in company parking
Especially in warehouses, factories or logistics centres, employees, cars and trucks travel together. Therefore, the separation of flows and speed control are part of the work security measures. Job security information is available on the website Labour Inspectorate. At the same time, a speed pump for parking correctly located reduces the risk of hitting the loading areas. In addition, mark the pedestrian paths on the asphalt and tie them to the overlifted passages.
Maintenance of parking devices
Special devices work daily under wheels, so check them periodically. First, it controls the screws and dilutes of the modules, especially after winter. Then clean the reflective sheets, because dust and mud reduce their visibility. At the same time, replace the broken or broken modules in time. In the case of the spiked device, check the mechanism and signal from both heads. Therefore, a speed pump for properly maintained parking keeps its effect and does not itself become an obstacle.
- Periodical: visual check of fixtures and sheets.
- After swimming: control of the modules touched by the snow blade.
- Refurbishment: the movement of the capes and passes after the new route.
Frequently Asked Questions about Parking Limiters
What do I choose for the colors between places?
Usually the spherical capes. Thus, this speed bump for parking slows down the cars and does not occupy the full width of the corridor.
Can I mount a single overlifted pass?
The modules are fixed with dibs and screws, so the assembly remains accessible. However, on public ground you need approvals.
Does the spike device offer safety?
Only with clear signaling and after risk analysis. Otherwise, such a speed bump for parking can cause damage.
Cable bridges support cars?
Bridges in this range target pedestrian traffic. For vehicles, choose the protection ramp for 3 cables.
Are you running a new parking lot or are you trying to solve a problem area? See all solutions in the category special limiters and choose each speed boom for parking after his role. The Protrafic.ro team helps you combine the devices for your traffic.



















