
Additional panel under indicator: what does the code in the P series mean
An additional panel under the indicator says when, what distance and for whom the rule applies above. Without it, a ban would act permanently and for all vehicles. The codes in the P series transform a general rule into a precise, easy-to-respect rule.
In short: an additional panel under the indicator specifies the area, time, time or category of vehicles for which the rule matters.
Do you need help choosing?
Tell us what you need and we'll send you the offer on the same working day.
Additional panels make the signal more accurate, because restrictions only work there and when it really matters. Select the code according to the main rule, mount the panel immediately below the indicator, on the same pillar, and avoid combinations that do not appear in the project. On the public road, the approval comes from the road manager and the road police, on the basis of a signalling project. See all 42 models in category Additional panels.
An additional panel under the indicator says when, where and for whom the rule applies above. Without it, a prohibition or obligation indicator would act at any time and for any vehicle. On Protrafic.ro, category Additional panels has 42 models in the P series. Next, see the most used codes and how you combine them correctly.
Role of an additional panel under indicator
First, the main indicator transmits the basic rule. In contrast, an additional panel under the indicator limits or specifies its effect. For example, a parking ban can only work at certain times. Thus, the driver receives an exact rule, not a general rule. Therefore, the panel allows you to apply balanced restrictions without unnecessarily blocking traffic.
How to read the driver set
The driver first looks at the indicator, then the bottom panel, as a single sentence. For example, "prohibited parking plus an hourly interval means that the rule only matters in that interval. Therefore, the message must remain short and easy to read from the walk. In other words, an additional panel under the indicator loaded with text loses its point.
P series codes by groups
Additional plate for the action area: P9 and P11
Panel P9 shows the beginning and length of the area where the indicator operates. After that, P11 confirms that the rule continues. Basically, this additional panel under indicator tells the driver that the restriction has not been completed.
Time and weather conditions: P6, P26, P29
Hours restrictions use Panel P6, showing the ranges at which the indicator acts. Also, P29 bind the rule of rain, mist or viscose. Then, P26 requires the use of reconnecting lights on the signaled sector. Therefore, an additional panel under the indicator adapts the signal to daytime and time.
Vehicles, parking lots and traffic lights: P5, P16, P23
P5 specify the category of vehicles to which the indicator refers. In addition, P16 announce a parking lot with payment. At the same time, P23 shows the direction of circulation for which light signals matter. In all these cases, an additional panel under the indicator turns a broad rule into a precise one.
How to mount an additional panel under indicator
First of all, the order on the pole counts. Thus, the main indicator stands up, and the additional panel comes immediately below, on the same support. At the same time, too many panels on a pillar make reading difficult, so it's worth avoiding where you can. It also chooses the size according to the indicator above and the project.
- Check if the pole is in place for both panels.
- Use compatible catchers for the indicator and the panel.
- Line up the edges, so the whole thing reads like one rule.
- Control the free height to the sidewalk or roadway.
For supports, see category positions for indicators, where you find and 3 m pillar with flank. Thus, each additional panel under the indicator remains stable and visible.
With what signs do you combine additional panels under indicator
Especially signs of restriction receive additional panels. For example, under the signs of the category prohibition indicators appear from P6 or P5. In exchange, near information indicators for parking frequently appears P16. So, you choose an additional panel below the indicator according to the type of the main rule.
How to choose the right code, step by step
First, it formulates the rule in words, for example, "without parking in the delivery range". Then choose the main indicator that expresses the basic part of the rule. Later, look in the P series for the panel adding the condition, i.e. time, distance, weather or vehicle. Finally, check whether the whole is easily read from the walk. Thus, an additional panel under the indicator completes the rule without complicit it.
Mistakes to avoid
- Texts or symbols that contradict the main indicator.
- Discolored panels, hard to read at night.
- Time intervals written too small or too loaded.
- Combinations that do not appear in the signalling project.
On public roads, however, the exact combination of signs is determined by the road manager, with the advice of the road police. The general rules are found, moreover, in road legislation, National legislative portal. Therefore, it does not add an additional panel under the indicator on a public road without approval.
Additional plate on private property
Also, the company parking lots, the logistics courts and the residential assemblies use these panels. For example, a P6 under a prohibited parking indicator only keeps the seats free in the delivery range. However, even on a private land, an additional panel under the indicator must use codes known to drivers. Otherwise, the rule becomes unclear and hard to apply.
Practical examples of additional plate
- Discharge ramp: parking ban plus P6 with delivery hours.
- Parking with payment: parking indicator plus P16.
- Frequent fog road: speed limit plus P29.
- Access only for certain vehicles: restriction plus P5.
In conclusion, each situation requires its combination, and an additional panel under the indicator makes the difference between a rigid rule and a useful one.
Frequently Asked Questions about Additional Panels
Can an additional panel stand under the indicator without a sign above it?
Nope. The additional panel completes an indicator and therefore does not make sense by itself.
What is the difference between P9 and P11?
P9 shows the beginning and length of the area. Instead, P11 confirms that the area continues.
Can I order P6 with a time interval of my own?
The interval displayed on an additional panel under the indicator shall correspond to the project. So, discuss with the team, before ordering, what variants exist.
Does the additional panel have the same sheets as the indicator?
Ideal, yes, because the whole must look uniform at night. Therefore, it checks the product description and the requirements of the project.
See all 42 models in category Additional panels. The Protrafic.ro team helps you choose each additional panel under the rule you want to apply.



















