
Light signaling on the machine: LED panels for work
A bright signal on the car warns drivers from time to time that a team is working in the front. The directional LED panels and remote control steering bars clearly show the direction of bypass. See which formats exist and how you choose the right option for your vehicle.
In short: The 200 mm LEDs look better away, the large panels help on fast roads, and the remote control keeps the team in the cabin.
Do you need help choosing?
Tell us what you need and we'll send you the offer on the same working day.
A light signal on the correct chosen machine turns the intervention vehicle into a shield visible to the working team. The panels of 60 x 60 cm and 70 x 70 cm fit mainly in the city, and those of 90 x 90 cm and 105 x 105 cm help on fast roads. The bars with 5 x 120 LEDs and remote controls simplify the direction change. Explore Category Vehicle signalling and choose the equipment that suits your vehicle.
A light signal on the car makes the intervention vehicle visible long before the drivers reach it. Especially on fast roads, a few seconds of extra warning matters enormously. In addition, the LED panel clearly shows the direction in which the traffic must be bypassed. So, we're not just talking about a flashing light, we're talking about a driving message.
When you need a light signal on the car
Typical situations occur where the vehicle is sitting or moving slowly on the roadway. Here are a few common examples:
- Mobile marking, cleaning or road maintenance work.
- Short interventions on networks, fireplaces or public lighting.
- Self-utilization protecting a team on the tape from behind.
- Trailers that temporarily close a circulation band.
In all these cases, a light signal on the car informs drivers that they have to slow down and change the band. However, the rules of movement and any opinions shall be laid down by the road manager and the authorities. Useful information about road traffic can also be found on the website Romanian Police.
Directional panels for light signalling on the machine
Category Vehicle signalling Find directional panels in four formats. The differences relate to the number of LEDs, their diameter and the size of the panel. Thus, for a light signal on the car you can choose between:
- Directional panel with 8 LEDs, diameter 100 mm, 60 x 60 cm, compact.
- Version with 13 LEDs, diameter 100 mm, 70 x 70 cm.
- Model of 90 x 90 cm, with 8 LEDs of 200 mm.
- Large format 105 x 105 cm, with 13 LEDs of 200 mm.
The manufacturer shall indicate these panels for the areas where work is carried out. You can also fix them on the poles, on self-utilisation, on trailers or on intervention machines. Therefore, the same light signal on the car may pass, if necessary, on a fixed support.
What changes the LED diameter and the size of the panel
A 200 mm LED has a much larger light surface than a 100 mm LED. Thus, the signal is better distinguished from a distance and in the bright light of the day. Instead, the 105 x 105 cm panel occupies more space on the body. The choice therefore depends on the vehicle and the speed of traffic in the area.
In the city, 60 x 60 cm or 70 x 70 cm formats usually fit. On the other hand, on speed roads, it deserves a bright signal on the large car. For example, the 90 x 90 cm or 105 x 105 cm panel provides a generous warning surface. At the same time, the number of LEDs influences how clearly the arrow is read.
LED and remote control bar guidance
In addition to panels, the category includes and Traffic guide LEDs, 5 x 120 LEDs, with remote control. They ride on cars that work on the roadway and help to direct traffic. Main advantage of the control: the driver changes the display mode without going down from the cab. Thus, the team passes quickly from left to right. In other words, a bright signal on the remote control machine reduces the time spent by people near traffic.
Assembly and food: what you check before the road
First, check that the vehicle support holds the panel firmly to vibrations. Then make sure the panel doesn't cover the headlights, registration numbers or stop lights. In addition, cables must remain protected against sharp edges and water. Also test all display modes before leaving for the work area.
A light signal on the car works well only if the power supply remains stable throughout the intervention. Therefore, discuss with the car electrician about the consumption and the necessary safety. However, do not modify the vehicle installation without a specialist.
Light signaling on the machine combined with other equipment
Signalled vehicle doesn't work alone. Usually, it protects an area bounded with temporary cones, beacons and indicators. For example, you can complete the set with signalling lamps or with LED indicators It's cool. Thus, a bright signal on the car becomes the last link, closest to the work team. On the other hand, the messages on the vehicle and those on the indicators must say the same thing.
Mistakes to avoid
- The panel remains lit on the arrow mode after the work is finished.
- The displayed direction does not correspond to the actual bypass.
- The dirt on the LEDs reduces the intensity of light.
- The vehicle sits in the curve, where the panel is not visible from time.
So, periodically clean the panel and check the message displayed at each move. In this case, a light-signalling on the car shall keep its warning role clear.
Frequently Asked Questions about Light Signaling on Car
What size of panel do I choose for a self-utility?
For an ordinary self-utilitarian, 70 x 70 cm or 90 x 90 cm formats offer a good compromise. However, first measure the space available on the stand.
Does it matter the diameter of the LED?
Yes, because the 200 mm LEDs have a larger light surface. Thus, the message is seen better from a distance.
Can I use a light signal on the car on a pole?
Yes, directional panels may also be attached to pillars or other supports. In addition, the same piece serves then also for stationary works.
Why would I choose the remote control option?
The remote allows you to change the display in the cabin. Therefore, no one should go down by traffic for a simple change of direction.
In conclusion, a light signal on the car chosen after the vehicle and after the type of road increases the safety of the team. View all models in category Vehicle signalling, and Protrafic.ro helps you choose the right format.



















